Galvanized lifting table for a hospital in Vienna: Exchange and assembly
Hydraulic scissor lift table for outdoor use - with assembly and maintenance by maluk.
maluk participated in the lift table tender and won.
We took the natural measurements before production began.
Delivery to Vienna including assembly with our lifting device.
At a large Viennese hospital, the existing lifting system needed to be renewed. The old lifting table had reached its end of life; the adjacent wooden ramp was also in poor condition. A simple replacement of the lifting table would therefore not have completely solved the problem.
A long-lasting solution for the outdoor area was sought that would not only renew the lifting technology but also the access and the necessary safety equipment.
maluk was able to win the public tender and took over the entire project: From the disassembly and disposal of the old system to the delivery and installation of the new lifting table, to the acceptance by a civil engineer. Maluk also performs ongoing maintenance and support.
The result is a galvanized hydraulic scissor lift table with a lifting capacity of 2,000 kg, a new entry ramp, side railings, a supporting protective portal and a folding bellows. A customized solution that was tailored to the existing structural conditions.
Complete service from maluk – even after installation
Our work was not yet complete with the installation of the new lifting table.
After the installation was completed, the lifting system was taken down by a qualified civil engineer. This also organized and completed the necessary testing before commissioning.
The further maintenance of this system is particularly important. A lifting table that is used regularly outdoors requires ongoing maintenance and the required inspections.
Maluk also provides this kind of support. This means that the Vienna hospital continues to have the same contact person for its lift system.
load
2,000 kg
Platform
2,350 x 1,300 mm
Hub
1300 mm
Old lifting table out – new lifting system in
Before the new system could be installed, space had to be created first. Our technicians dismantled the existing lifting table and the already dilapidated wooden ramp. Both were properly disposed of.
Subsequently, the new hydraulic scissor lift table was installed and connected to the adjacent areas. Since the system is located outdoors and exposed to all weather conditions throughout the year, a galvanized version was used.
With a platform size of 2,350 × 1,300 mm and a load capacity of 2,000 kg, the new lifting table provides sufficient reserves for the intended cargo transport. The utility lift of 1,300 mm allows for the height adjustment between the two levels.
An important advantage for the hospital: The disassembly, disposal, new lifting equipment and assembly were handled by a single team. The coordination between several suppliers thus largely fell through.
Galvanized lifting table with pleated bellows for outdoor use
An outdoor lift table is exposed to more stresses than an installation inside a building. Rain, snow, moisture, and temperature fluctuations must already be taken into account during planning.
Therefore, the new lifting table was supplied in a galvanized version suitable for outdoor use. The shearing structure and the base frame were primed and coated with a protective paint.
The black pleated bellows is particularly visible under the platform. It covers the movable shearing mechanism and prevents inadvertent contact with the moving area below. At the same time, it reduces the direct entry of dirt into the shearing structure.
The platform itself was equipped with a sturdy sheet of tinplate. The profiled surface provides more grip in wet conditions than a smooth steel sheet – an important point especially in outdoor areas.
New ramp instead of the old wooden construction
Not only the lifting table had to be replaced; the previous wooden ramp was also in an unsatisfactory condition.
As part of the renovation, maluk supplied and installed a new galvanized guardrail with double-sided handrails. It forms the connection between the yard area and the lifting table.
Thanks to the coordinated design, transport equipment can be moved onto the lifting table platform via the ramp without having to overcome significant height differences. Especially when moving heavier loads, a smooth transition is crucial.
The new ramp integrates structurally and visually into the entire facility. Instead of an old wooden structure, the hospital now has a robust steel ramp that is also intended for outdoor use, along with the lift table.
Commuter portal, handrails and safe operation
In a lift table with a lifting height of 1,300 mm, the fall protection system plays an important role. Because as soon as the platform lowers, an open edge forms at the upper holding point.
To secure this area, a side-mounted protective portal assembled. The portal moves together with the lifting table and serves as a fall protection at the upper holding point.
In addition, the platform received two fixed longitudinal railings. Together with the railings of the ramp, this creates a continuous lateral demarcation of the transport routes.
Operation is controlled via a push button with the functions ON, OFF and EMERGENCY STOP. An integrated key switch allows the operation to be restricted to authorized persons.
Safety was also considered below the platform: the system features, among other things, maintenance supports, an overpressure valve and a check valve. A lifting switch limits movement in the upper end position.
Does your lifting table need to be renewed?
Whether an old lifting table needs to be replaced, an existing ramp needs to be adapted, or a completely new lifting system needs to be planned: maluk supports you from the initial inventory assessment to the final solution.
We design and supply hydraulic lifting tables in special versions and, upon request, also undertake disassembly, assembly, acceptance organization, and ongoing maintenance.
Contact us – we will find a suitable solution for your installation situation.
FAQ for outdoor lifting tables
Frequently asked questions about outdoor hoists
Yes. The prerequisite is that the entire system is designed for outdoor use. This includes appropriate corrosion protection, weather-resistant electrical components, and hydraulics adapted to the environmental conditions. Therefore, in this hospital project, a galvanized design with an additional bellows was chosen.
In many cases, yes. The available dimensions, the structural situation, and the required load-bearing capacity and lifting height are crucial factors. When replacing the equipment, adjacent components such as ramps and railings should also be checked. In addition, the applicable regulations and standards must be adhered to. maluk can handle both the disassembly and disposal of the old equipment as well as the delivery and installation of the new lifting table.
A bellows protects the movable shearing structure and reduces direct access to the area below the platform. Additionally, it protects the underlying components from some of the external contamination. Whether additional safety devices are required depends on the installation situation and the risk assessment. In this case, from the service area, one cannot see the danger area under the platform, therefore bellows are necessary.
For fixed-mounted lifting tables that exclusively transport goods, a certification test is required under the Austrian Machinery Regulations if the load-bearing capacity exceeds 10 kN or the lifting height exceeds two meters. The installation of the Vienna hospital with a load capacity of 2,000 kg was carried out by a civil engineer.
The maintenance intervals are determined by the manufacturer’s specifications, the level of usage and the operating conditions. In Austria, recurring inspections are required for lift tables exclusively for freight transport at least once per calendar year, no later than 15 months after installation. Maintenance and statutory inspections must be distinguished from each other. maluk provides ongoing maintenance and technical support for the system.