Rosenhain 24 9125 Kühnsdorf, Austria
6,000 kg load capacity · Platform 1,500× 1,300 mm · Useful width 800 mm

Serial production of 10 lifting tables for tarpaulin machines – 6 tons of lifting capacity per lifting table

Ten identical lifting tables, each with a lifting capacity of 6,000 kg and a special requirement: heavy cable drums must be lifted at different heights and then rolled safely to the hall level.

Planning & Design
The platform size was designed in collaboration with the customer.
Stability
The rolling load must be loaded in a middle-of-the-range position of lift.
Lift table mass production
Production of 10 lifting tables in a series.
maluk series production of table tops

For a German manufacturer of wire-drawing machines, maluk was able to implement ten hydraulic scissor lifts as special-order components. The lift tables are integrated directly into the machine systems and perform an important task there in handling heavy cable drums.

The challenge lay not so much in the sheer lifting force as in the combination of high load, rolling drums and precisely defined transfer positions. At the same time, all ten lifting tables should be designed identically so that they could easily be integrated into the intended machine concepts.

Our solution: one Series of ten hydraulic heavy-duty lifting tables, Designed specifically for the requirements in the windlass manufacturing industry.

Serial production of lifting tables for machine and plant construction

This project shows that special lifting tables and mass production are not mutually exclusive.

Many machine manufacturers require lever solutions that are precisely tailored to their equipment. This does not always involve extraordinary platform sizes or particularly large lifting heights. Often, it is the details that make the difference: special load cases, defined transfer heights, external hydraulic units, or suitable interfaces for machine control.

At maluk we develop hydraulic lifting tables to suit the specific application and can also supply them in series.

Whether five, ten, twenty or more identical lifting tables – we support machine builders and plant manufacturers in the technical design and implementation of their lifting solutions.

Load capacity

6,000 kg

Platform

1,500 × 1,300 mm

Hub

800 mm

Ten identical hydraulic lifting tables for use in tarpaulin machines.

Ten identical lifting tables – mass production instead of a one-of-a-kind solution

Not always only a single special lifting table is required. Especially in machine and plant construction, several identical lifting units are often used, which must work reliably together and fit into an overall machine concept.

Ten identical lifting tables with a lifting capacity of 6,000 kg each were manufactured for this project. Each lifting table has a platform measuring 1,500 × 1,300 mm, a lifting height of 800 mm, and a build height of 400 mm.

The advantage of mass production is obvious: The technical design is applied to the entire series. Dimensions, hydraulic components, electrical interfaces and design are coordinated with each other.

For the machine manufacturer, this means uniform components, simplified integration, and a clear basis for subsequent maintenance and spare parts supply.

Exactly these kinds of projects are our strength: We not only supply individual standard lifting tables, but also develop and implement custom lifting table series – from a few units of the same design to larger quantities.

AI visualizations of a hydraulic lifting table under high load conditions.

Designed for rolling cable drums with a carrying capacity of up to 6,000 kg

The lifting tables take over the heavy cable drums directly from the tarpaulin reel. Depending on the machine operation, the transfer takes place at different heights.

The drum is then lowered to the level of the floor of the hall. From there, it can be rolled away from the platform and transported further.

What sounds simple places particular demands on the design.

A rolling drum loads a lifting table differently than a stationary, uniformly distributed load. During rolling and lifting, the force introduction and load distribution on the platform change.

Therefore, the design was not only based on the nominal load capacity of 6,000 kg, but was explicitly designed for the operating conditions encountered in use. rolling drum load dimensioned.

A stable stand in the respective transfer position is equally important. The lifting tables must reliably support the drums and enable a controlled transfer.

The result is a robust lever solution that integrates into the working process of the tarpaulin machine and facilitates the handling of heavy drums.

A look under the platform: hydraulic cylinders, scissor arms and base frame of a heavy-duty lifting table.

Hydraulics, position monitoring and integration into the machine control system

In these lifting tables, a single-axis hydraulic shearing system with plunger cylinders is used. The platform is lifted within approximately 40 seconds over the entire lifting stroke of 800 mm.

A special feature is the position detection.

In addition to lifting switches for the upper and lower end positions, each lifting table has an additional switch for a middle position. Additionally, a cable tensioning system is provided for detecting the lifting position.

This provides the necessary information for positioning and monitoring within the machine workflow.

The electric version was also designed to integrate seamlessly into the overall system. The lifting tables are supplied without a separate control unit. Instead, the electrical connections are wired to a terminal box and can be integrated into the overall machine control system.

The hydraulic unit is located outside the lifting table and is connected via three-meter-long hydraulic hoses.

For the machine manufacturer, this design provides the necessary flexibility for integration into the wireline system.

Two lifting tables as packaged transport unit before loading.

Uniform design, neatly packaged and prepared for integration

In mass production, it’s not just the design that matters; the uniform design of the individual lifting tables also plays an important role.

All ten lifting tables were manufactured with green-painted platforms in RAL 6029. The saw blade and base frame received a KTL primer and a powder coating.

The equipment includes, among other things, maintenance supports, an overpressure valve and a check valve.

The delivery also includes technical documentation with operating and maintenance instructions, hydraulic and electrical wiring diagrams, and a spare parts list.

For transportation, the lifting tables were packaged in pairs and prepared for further use at the machinery manufacturer.

In this way, ten coordinated lifting units could be deployed for the intended use in the winders.

Load test at the plant

Before each delivery, we perform a load and functional test.

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

Do you need several identical lifting tables for your machines?

Whether 5, 10, 20 or more lifting tables – maluk is your partner for the serial production of customized hydraulic lifting tables.

We develop and supply lifting tables that are precisely tailored to your machines and production processes. From special load capacities to defined lifting positions, to integration into your machine control system.

Are you planning a new series of machines or do you need several identical lifting tables?

Contact us with your requirements and the desired quantity. We will work out a technically and economically suitable solution.

Request serial production of lifting tables now!

FAQ Mass production table

Frequently asked questions about mass-produced lifting tables.

Yes. In addition to individual special lifting tables, several identical lifting tables can also be manufactured in series. In this project, ten hydraulic heavy-duty lifting tables with identical technical specifications were implemented. The design is adapted to the requirements of the respective machine system.

Yes, provided the lifting tables are designed accordingly. Rolling drum loads lead to alternating loads and require appropriate sizing of the platform, scissor design, and hydraulics. In this project, the design was explicitly provided for rolling drum loads with a load capacity of 6,000 kg.

Yes. Hydraulic lifting tables can be supplied without their own control unit and prepared for integration into a higher-level machine control system. In this project, the wiring was done on a terminal box. The machine control system can thus integrate the corresponding functions into the entire system operation.

Yes. In addition to the upper and lower end positions, additional lifting positions can be provided. The lifting tables used here have end switches for three defined positions as well as a cable tensioning system for detecting the lifting position. This allows the transfer of the cable drums to different machine heights to be adjusted.

Serial production is particularly interesting for machine construction, plant construction, conveyor technology, the cable industry, automation technology, and industrial production systems. Wherever multiple identical lifting units are required, a common technical design and serial production can be beneficial.